Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Angles of installation of wheels of the car, clearance
   - Forward suspension bracket
      Adjustment of a gap in the bearing of a forward wheel
      Removal and installation of the lower spherical support
      Check of a condition of the top spherical support
      Replacement of the top cross lever
      Replacement of the lower cross lever
      Removal, check and installation of a nave of a forward wheel
      Removal and installation of assembly of a rotary fist
      Removal and installation of a screw spring
      Removal and installation of the stabilizer of cross stability
      Removal and installation of the shock-absorber
      The regulator of clearance of a forward suspension bracket - an installation detail
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment






Adjustment of a gap in the bearing of a forward wheel

Adjustment of a gap in the bearing of a forward wheel

9d — the Nut
9e — a nave Cover
9i, 48a — Bolts
015 — an indicator Support
022 — the Indicator


 PERFORMANCE ORDER

1. Remove a forward wheel.
2. Screw a bolt (48a) of fastening of a wheel.
3. Block a forward brake disk a brake support, having pressed a brake pedal.
4. Uncover (9e) naves.
5. Turn off a nut (9d).
6. Attach the indicator (022) with a support (015).
7. Adjust a gap in the wheel bearing rotation of a nut (shooter) in the necessary direction. The nominal size of a gap in the bearing of a forward wheel makes 0.01-0.02 mm.
8. Tighten a bolt (91) and double-check a gap.
9. Press a brake pedal several times.












58b5488c