Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



58b5488c

Replacement of conic roller bearings of an intermediate shaft

Arrangement of conic roller bearings

Arrangement of conic roller bearings

39 — the Forward conic roller bearing
40 — the Intermediate shaft
41 — the Back conic roller bearing
49 — the Intermediate case

78 — the External holder of the back bearing
97 — the External holder of the forward bearing
100 — the Transmission


 PERFORMANCE ORDER

1. Vypressuyte the forward conic roller bearing (39) from an intermediate shaft (40).
2. Vypressuyte the back conic roller bearing (41) from an intermediate shaft (40).
3. Carefully to a vypressuyta an external holder of the bearing (97) from the transmission case.
4. Carefully to a vypressuyta an external holder of the bearing (78) from an intermediate case.
5. Measure and adjust distance of "A" (see the Section Verification of Dimensional Characteristics of the Transmission).