Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



58b5488c

Removal and installation of a back cover of the transmission

Details of installation of a back cover of RKPP

Details of installation of a back cover of the transmission

50, 113b, 103a — Laying
71 — the Lever of inclusion of the 1st transfer
72, 82a, 113a — the Bolt
82 — the Back cover of the transmission

87 — the Flange
88 — the Nut
100 — the Transmission
113 — the Blocking bearing

Removal

 PERFORMANCE ORDER

1. Fix the transmission on a support.
2. Remove the blocking bearing (113).
3. Turn off a nut (88) and remove a flange (87).
4. Remove the lever of inclusion (71) of the 1st transfer.
5. Turn off a bolt (101) and remove a shaft (103).
6. Turn off bolts (82a) and uncover the transmission (82).

Installation

 PERFORMANCE ORDER

1. Replace laying (50), grease bolts (82a) with sealant 001 369 2520 (Hylomar) and tighten bolts the moment of 23 Nanometers.

2. Replace a sealing ring (103a), grease a bolt (101) with sealant 001 989 25 20 (Hylomar) and tighten its moment 5 Nanometers.

3. Replace a nut (88) and tighten its moment 160 Nanometers.

4. Further installation is carried out as it should be, the return to removal.