Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



58b5488c

Removal and installation of a forward cover of the transmission

Details of installation of a forward cover of the transmission

Details of installation of a forward cover of the transmission

92 — the Forward cover of the transmission
92a — the Bolt
93 — the Epiploon
94, 96 — Laying

100 — RKPP
150 — the coupling switching off Bearing
155 — the coupling switching off Lever

Removal

 PERFORMANCE ORDER

1. Fix the transmission on a support.

2. Merge oil from the transmission (about 1 7 l).
3. Remove the bearing of switching off of coupling (150) and the lever of switching off of coupling (155).
4. Turn off a forward cover (92).
5. Having hooked the screw-driver, take an epiploon (93).

Installation

 PERFORMANCE ORDER

1. By means of a suitable mandrel press a new epiploon against the stop.
2. Grease and establish laying (94) and (96) in a cover of the transmission (02).

3. Further installation is carried out as it should be, the return to removal.