Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



58b5488c

Replacement of ball bearings of an intermediate shaft

Arrangement of ball bearings

Arrangement of ball bearings

3 — the Lock ring
43, 70 — Ball bearings
73 — the Holder of the bearing


 PERFORMANCE ORDER

1. Remove a lock ring (3).
2. Vypressuyte the ball bearing from the leading shaft.

3. Remove a kosozuby gear wheel of the 2nd transfer (33) and the ball bearing (70) with the holder (73).
4. Vypressuyte the ball bearing (70) from a clamp (73).
5. Press the ball bearing (70) in an intermediate case a plate and fix it by the holder (73).

6. Measure and adjust distance "With" (see the Section Verification of Dimensional Characteristics of the Transmission).