Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Security measures when carrying out body works
   Replacement of brushes of screen wipers
   Replacement of the saloon filter
   Removal and installation of the dashboard
   Removal and installation of the combined understeering switch
   The switch of light of headlights - installation details
   Removal and installation of a combination of devices
   Control lamps and alarm indicators of an instrument guard - an installation detail
   Measuring instruments of a combination of devices - the scheme of an arrangement and detail of installation (model on 10.93 g of the issue)
   Removal and installation of the control unit of the automatic conditioner
   Removal and installation of the push-button control panel of the conditioner (models for 31.08.95 the issue with the Bosch control unit)
   Replacement of control lamps of the push-button control panel of the conditioner
   Check of the pneumatic regulator of an inclination of optical axes of light of headlights
   Switches of the central console - an installation detail
   Removal and installation of the central console
   Loudspeakers - installation details
   Removal and installation of panels of an internal upholstery of doors
   Bumpers - installation details
   The combined relay - installation details
   Forward doors
   Back doors - installation details
   Adjustment of a cowl
   Block headlights - installation details
   The back combined lamps - installation details
   Removal and installation of the RPM meter of the compressor of the conditioner (model for 31.08.95 the issue)
   Check and adjustment of provision of headlights
   Adjustment of a cover of the luggage compartment
   Forward wings and loker of protection of wheel arches - installation details
   Decorative front grille - installation details
   Emblem of "Mercedes"
   Removal and installation of external rear-view mirrors
   Removal and installation of seats
   Removal and installation of head restraints
   Deflectors of air ducts of the dashboard - an installation detail
   Forward indexes of turns - installation details
   Backing fires - installation details
   Cover of a ware box - an installation detail
+ Onboard electric equipment


Security measures when carrying out body works

At repair of a body it is necessary to apply spot welding. Only if it is impossible to bring electrodes to the place of welding, it is necessary to apply welding in the environment of inert gases. As some elements of a body are galvanized, it is necessary to take the following security measures:
  • When carrying out the welding works or any other works connected with formation of sparks surely switch-off the rechargeable battery (positive and negative cables) and carefully isolate both plug(s) and (+). When working near the rechargeable battery, it needs to be removed. Without code the radio receiver can be switched on only it by the manufacturer or HUNDRED Mercedes-Benzs;
  • When welding galvanized sheets poisonous oxide of zinc is formed. Therefore it is necessary to monitor good ventilation of a workplace. Increase welding current on 10 (at most 30) percent. Apply electrodes from solid copper with high thermal resistance (above + 400 °C). Clear electrodes more often and process them to diameter of a contact surface in 4 mm. Increase pressure upon an electrode. Increase welding time. Time is chosen truly if welding ends are put without splashes;
  • The conditioner details filled with coolant cannot be welded and soldered both soft, and solid solder. It belongs also to a situation when there is a danger of heating of elements of the conditioner during the welding or the soldering of other elements of a design.
  • At removal of the battery the memories given from electronic blocks, in particular, a radio receiver code are erased!

    In addition

    It is not necessary to open a contour of cooling of the conditioner since coolant at hit on skin can cause a frostbite.

    When drawing a paint and varnish covering in the drying furnace heating of the car up to one temperature higher + 80 °C is not allowed. Otherwise electronic devices of the car can be damaged. Besides, in the conditioner pressure able increases to lead to destruction of system.

    The car bottom sheeting from PHV is removed the rotating steel brush or hot air temperature to + 180 °C by means of the pallet. When heating a covering from PHV up to the temperature over 180 °C there is a chemical reaction and the hydrochloric acid promoting active development of corrosion is formed, besides, noxious to health vapors are formed.